Inserting
and
Removing
a
Tape
Use
only
videocassettes
marked
with
the
MiniDt
T
logo. To
record
in
HDV
standard
we
recommend
using
tapes
specifically
designed
for
high
definition.
1 Slide
[oPEN/EJECT~l
fully
in
the
direction of the arrow and open the
cassette compartment cover.
The cassette compartment opens
automatically.
2 Insert the cassette.
• Insert the cassette with the window
facing the grip belt.
•
To
remove the cassette pull it straight
out.
3 Press the lPUSH] mark
on
the
cassette compartment until it clicks.
4 Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
QIMPORTANT
•
Do
not interfere
with
the cassette
compartment while
it
is
opening or closing
automatically, or attempt
to
close the cover
before
the
cassette compartment has fully
retracted.
•
Be
careful not
to
get your fingers caught
in
the cassette compartment
cover.
CD
__
t.!~.!~~
.
__
. J
If the camcorder
is
connected
to
a power
source, cassettes
can
be
inserted/removed
even
if the
IiI!1IaD
switch
is
set
to
_ (CHG).
Inserting
and
Removing
a
Memory
Card
Use
only
commercially
available
miniSD
cards.
1 Turn off the camcorder.
2 Open the LCD panel.
3 Open the memory card slot cover.
4 Insert the memory card straight with
the "miniSD" label facing up, all the
way into the memory card slot until
it clicks.
5 Close the cover.
Do not force the cover closed
if
the
memory card is not correctly inserted.
To
REMOVE
THE
MEMORY
CARD
First push the memory card once to
release it, and then pull the card out.
To Next Page
Loading...
Need help?
General