..
Connecting
to
a TV or VCR
•••••
--------------------
Recording
1 This camcorder: Load the recorded
cassette.
2 Connected device: Load a blank
cassette or disc and set the device
to record pause mode.
3 This camcorder: Locate the scene
you wish to copy and pause the
playback shortly before the scene.
When the connection is recognized
"~HDV/DV"
will be displayed. When
the video output starts, the display will
change to
"~H
DV-QUT" or
"~DV-QUT"
depending on the video
output signal.
4 This camcorder: Resume the movie
playback.
When using an analog connection you
can include
in
the copy the date, time
and data code of the original
recording, as well. Repeatedly press
[DISP. ] to change the on-screen display
(OJ 61).
5 Connected device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying
is
complete.
6 This camcorder: Stop playback.
- Proper operation cannot be guaranteed for all
digital devices equipped with a
OV
terminal. If
the operation does not work, use the
AV/O
terminal.
•
You
cannot record to
an
external device using
the
HOMI
connection -connection type
6-.
Analog
Line-In
Recording
You
can input video from
an
analog video
source (VCR,
TV,
etc.) and record the
input video
on
the tape
in
the camcorder
in
DV standard. Analog video cannot be
converted to HDV standard.
(CD
12)
Connecting
Connect the camcorder to the video input
source using an analog connection -
connection type
II
(OJ
71)-
shown
in
the
previous section
Connection Diagrams.
Recording
Load a blank tape
in
the camcorder and
load the recorded (source) tape or disc
in
the connected device.
1 Press [FUNC.].
2 Select
<.T)
[e
..
REC PAUSE] and
press
(8).
3 Select <
....
~
) [EXECUTE] and press
(8).
4 Connected device: Start the
playback.
In
record pause mode and while
recording you can check the picture
on
the camcorder's screen.
(!INOTES . . .
__
.
__
. J
• We recommend powering the camcorder
using the compact power adapter.
• When recording to a VCR using
an
analog
connection -connection type
II
(OJ
71
)-,
the
quality of the edited tape
will be lower than that
of
the original.
• When recording to a digital video recorder
using the
HOV/OV
terminal -connection type fJ
(OJ
71)-:
- If the picture does not appear, disconnect the
OV
cable and restore the connection after a
short while or turn the camcorder off and then
on again.
FUNC.
(
[IJ
25)
FUNC.