--------------------------~
••••
R&o~ing
~
Recording
Still
Images
•
r----------,
•
OJ
l»
t/)
(')
"
c::
:::s
(')
=:.
o
:::s
t/)
khfl'!I,!'HI
_I
(CD
12)
G)~t
0),
@
,"
PHOTO
'.
PHOTO
:SI:
~"
'"
Before
using
a
memory
card
for
the
first
time,
be
sure
to initialize it with this
camcorder
(CD
70).
1
Holding
the
lock
button
pressed
down,
set
the
~
switch
to
CAMERA.
2
Move
the
10Ll1
/~
switch
to
~
(memory
card).
3
Press
[PHOTO1 halfway.
•
Once
the
focus
is
automatically
adjusted,
0
will
turn
green
and
one
or
more
AF
frames
will
appear.
•
When
you
press
[PHOTO]
on
the
wireless
controller,
the
still
image
is
recorded
immediately.
4
Press
[PHOTO] fully.
The
CARD
access
indicator
will
flash
as
the
image
is
being
recorded.
become distorted or it may not be recorded at
the actual levels. This is not a malfunction.
•
About
the
Power
Save
mode:
To
save power
when the camcorder is powered by a battery
pack, the camcorder will automatically shut off if
left without any operations for 5 minutes
(CD
46).
To
restore the power, turn the
camcorder off and then on again.
•
About
the
LCD
and
viewfinder
screen:
The
screens are produced using extremely high-
precision manufacturing techniques, with more
than 99.99% of the pixels operating to
specification. Less than 0.01
%
of
the pixels
may occasionally misfire
or
appear as black,
red, blue or green dots. This has no effect on
the recorded image and does not constitute a
malfunction.
•
When
using
a tripod: Do not
leave the viewfinder exposed to
direct sunlight as it may melt
(due to concentration
of
the light
by the lens). Do not use tripods
with fastening screws longer
than 5.5 mm (0.2 in.). Doing so
may damage the camcorder.
•
When
recording
movies,
try to get a
calm,
stable
picture.
Excessive camcorder movement while shooting
and extensive use of fast zooms and panning
can result
in
jittery scenes.
In
extreme cases,
the playback of such scenes may result
in
visually induced motion sickness.
If
you
experience such a reaction, immediately stop
the playback and take a rest break as
necessary.
To Next Page
Loading...
Need help?
General