~
~oo~ing
•••••
---------------------------
Observe the following precautions while the
card access display
(~
[]
) appears on screen
and when the CARD access indicator
is
on or
flashing. Failing to do so may result
in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source
or
turn off
the camcorder.
-
Do
not change the position
of
the
~
/
c:g
switch
or
the operating mode.
• If the subject
is
not suitable for autofocus, 0
turns yellow. Adjust the focus manually
(CD
53).
• When the subject is too bright, "OVEREXP."
starts flashing.
In
such case, use the optional
FS-43U
II
NO
filter.
Zooming
INTS
TO
CHEeif··········
···························1
____
._~~,~--------
•
__
I
10x
Optical
Zoom
Move the zoom lever toward W to
zoom out (wide-angle). Move it toward
T to zoom
in
(telephoto).
You
can also change the zoom speed
(CD
39). You can select one
of
three fixed
zoom speeds or a variable speed that
depends on how you operate the zoom
lever: Press gently for a slow zoom; press
harder for faster zooms.
•
You
can also use the T and W buttons on the
wireless controller or the LCD panel. The zoom
speed with these buttons will be the same as
with the camcorder (when one of the fixed zoom
speed levels
is
selected)
or
fixed at
[~
SPEED 3] (when
[WlID
VARIABLE]
is
selected).
• When set to
[WlID
VARIABLE], the zoom
speed will be faster
in
the record pause mode.
• Keep at least 1 m (3.3
ft.) away from the
subject. At wide-angle, you can focus
dtl
a
subject as close as 1
em
(0.39 in.).
(CD
12)
ICAMERA"IS!§II:
In
addition to the 1
Ox
optical
zoom, the 200x digital zoom is also
available
(CD
39).
Zoom out
..
w
T
Zoom
in
To Next Page
Loading...
Need help?
General