--------------------------~--Tmu~~
~
Troubleshooting
If you have a probtem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power
Source
Problem
Solution
CD
• Camcorder will not turn on.
Battery pack is exhausted. Replace or charge the battery pack. 20
• The camcorder switches off
by itself.
Attach the battery pack correctly.
• The cassette compartment
cover will not open.
• The LCD/viewfinder switches
on
and off.
The CHARGE indicator flashes Charging has stopped because the compact power adapter or
-
rapidly (about twice per the battery pack is faulty.
second).
• Battery pack will not charge.
Charge the battery pack
in
temperatures between 0 °C and
-
• The CHARGE indicator
40°C
(32
OF
and 104
OF).
flashes very slowly (about
Battery packs become hot with use and may not charge. When
-
once every 2 seconds).
the battery pack is outside the charging temperature range, the
CHARGE indicator will flash irregularly. The charging will start
once the battery pack temperature is below
40°C
(104
OF).
The battery pack is damaged. Use a different battery pack. -
Recording/Playback
Problem
Solution
OJ
Buttons will not work. Turn on the camcorder.
-
Load a cassette. 22
Abnormal characters appearon
Disconnect the power source and reconnect it after a short time.
-
the screen. The camcorder
If the problem still persists, disconnect the power source and
does not operate properly.
press the RESET button with a pointed item. Pressing the
RESET button resets all settings.
..
~
" flashes on the screen.
Load a cassette. 22
..
<Ls;:J"
flashes
on
the screen.
Battery pack is exhausted. Replace or charge the battery pack. 20
"00
" flashes on the screen.
Condensation is detected. See reference page.
99
The lens cover is not
Turn the camcorder off and then
on
again.
-
completely open.
"~
" flashes red on the screen. The camcorder malfunctions. Consult a Canon Service Center. -
"REMOVE THE CASSETTE"
Remove the cassette and reinsert
it.
22
appears on the screen.
The wireless controller will not Set [WL.REMOTE] to [ON].
46
work.
The battery
of
the wireless controller is exhausted. Replace the
23
battery.
•
»
c.
c.
...
~
0'
..,
3
t\,)
...
o
~
-
To Next Page
Loading...
Need help?
General