Locating
the
End
of
the
Last
Scene
After playing back a tape, use this
function to locate the end
of
the last
scene recorded
in
order to continue
recording from that point.
Locating
Scenes
by
Recording
Date
You
can locate the change of the date/
time zone with the date search function.
Stop the playback before using this
function.
________
J
• Recordings shorter than 1 minute per datel
time zone cannot be located with this function.
• Date search may not function if the date, time
or
data code are not correctly displayed.
• If there are sections recorded in different
standards (HDV/DV) on the same tape, the date
search may not work correctly.
CD
NOTES
Press
[1+111
or
[~II
on the wireless
controller.
• Press more than once to search for
further date changes (up to 10 times).
•
To
cancel the search press [STOP
-I.
FUNC.
1 Press [FUNC.].
2 Select (
.......
)[
...
END SEARCH] and
press
(8).
3 Select (
~~
) [EXECUTE] and press
(8)·
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards
the tape, plays back the
lastfew
seconds ofthe recording and stops the
tape.
•
To
cancel the search press (i).
FUNe.
(CD
25)
• End search cannot be used once you remove
the cassette.
• If there are blank sections between
recordings
or
sections recorded
in
different
standards (HDV/DV) on the same tape, the end
search may not work correctly.
To Next Page
Loading...
Need help?
General