--------------------e
....
Connecting
to
a
TV
or
VCR
I
- There will be no video or audio output from
the HDMI OUT terminal while there is a video
input connection to the HDV/DV terminal or the
AV/O terminal.
-
To
output audio dubbed later
on
a tape
through the HDMI OUT terminal, set [AUDIO
OUT] to
[ttl
MIXNAR]
(CD
43).
- Audio output from the HDMI OUT terminal will
include both channels (Left/Right
on
a stereo
recording, Main/Sub on a bilingual recording),
regardless
of
the [OUTPUT CH] setting.
Recording
to
a
VCR
or
Digital
Video
Recorder
You
can copy your recordings by
connecting the camcorder to a VCR or a
digital video device. When recording to a
digital video recorder using the HDV/DV
terminal, you can copy recordings with
virtually no generation loss
in
video and
sound quality.
Connect the camcorder to the external
device following one
of
the connection
diagrams shown
in
the previous section
Connection Diagrams
(CO
71).
(CO
12)
Change the following settings as
necessary before making the
connections. Refer to the corresponding
explanation
of
each setting
in
the
IE+
PLAY/OUT SETUP menu option list
(CD
42).
- [PLAYBACK STD] to select the output video
standard.
- [DV OUTPUT] to select the standard
of
the
output video when using connection type
fJ.
Note that the video standard
of
the recorded
copy depends also
on
the standards supported
by the external digital device. Refer
to
the table
below.
- Set [AV/PHONES] to [I
AV
I
AV]
when using
connection type
II.
Connecting
Connect the camcorder to a VCR
or
other
analog device using connection type II.
or to a DVD recorder
or
other digital
recording device using connection type
fJ, as shown
in
the previous section
Connection Diagrams
(CD
71).
High
[HOV]
[HOV)
[B
AUTO] or
[1:I-Va·V' HDV/DV]
Definition
[IHDVI
HDV]
IHOV]
lov]
[B
AUTO] or
[ffi!)
DV LOCKED]
Standard
[IHDVI
HDV]
Definition
[B
AUTO] or
[1:I-lfa.Vj HDV/DV] or
lovi
lov]
[ffi!)
DV]
[ffi!)
DV LOCKED]
Settings
for
Recording
Video
Output
using
the
HDV/DV
Terminal
Standard
of
Standard
Supported
[PLAYBACK
STDI
'
Video
Output
the
Recording
by
the
External
Setting
Signal
on
the
Tape
Digital
Device*
[OVOUTPUT]
Setting
-
m
><
-
CD
""'I
~
l»
o
o
~
~
CD
(")
=
o
~
t/)
*
To
output video
in
high definition verify that the DV terminal
on
the external digital device is
compatible with the MPEG2-TS protocol; to output video
in
standard definition, verify that it is
compatible with the DV standard.
To Next Page
Loading...
Need help?
General