-
The
brightness
of
the AF-assist lamp could be
an inconvenience. Consider turning it
off
in
Self
Timer
public places such as restaurants or theaters.
FUNC.
(OJ 12)
It:AMEU~en:
Set the camcorder
in
record
pause mode.
FUNe.
(CO
25)
(OJ 12)
Mini
Video
Light
You
can turn on the mini video light
(assist lamp) at any time regardless
of
the
recording program.
•
We
do not recommend using the mini video
light while the optional Wide-converter is
attached; its shadow can appear on the screen.
• The built-in mini video light will be disabled
automatically when you attach the optional VL-3
Video Light.
To
use the built-in mini video light,
set the switch on the VL-3 to OFF and then
press
[LIGHT
I.
Press
[LIGHT].
• V appears on the screen.
• Press [LIGHT 1 again to turn the mini
video light off.
To
USE
THE
OPTIONAL
VL·3
VIDEO
LIGHT
You
can attach the optional VL-3 Video
Light to the advanced accessory shoe if
you want a more powerful video light the
built-in mini video light. For details about
attaching and using the video light, refer
to the instruction manual
of
the VL-3.
When a video accessory
is
attached to
the advanced accessory shoe, .,,$'" will
appear on the screen.
J
(FUNC.]
¢I
r~
MENU
Once
the countdown has begun, you can
cancel the self timer by turning
off
the
camcorder.
ICAMERA
SETUP.
ISELF TIMER
[FUNC.]
¢J
I_O_N
--'
~
appears.
fCAMEUtii211
:
Press
[r=S=TA:-':R=T=/S=T=O="'P
].
The camcorder starts recording after a
10-second countdown*. The countdown
appears on the screen.
ICAMEIIAfi:;.91
:
r=--=-=--=--
Press [PHOTO],
first
halfway
to
activate
the
autofocus
and then
fully
to
record
the
still
image.
The camcorder will record the still image
after a 10-second countdown*. The
countdown appears on the screen.
* 2 seconds when using the wireless
controller.
._~
__
._J
CD
NOTES
To Next Page
Loading...
Need help?
General