CAS CL5200 Series User Manual

13
7
2.14.3 Department (Menu code 1830)
( MENU → 8. Scale Config → 3. Department )
This section shows how to select current department where scale is being used.
User can use (call up) PLUs only for current department selected in sales mode.
For example, if current department selected is GROCERY user can call up items
registered only in GROCERY department. If user would like to use PLUs registered
in other department than current department he/she should change scale s
department setting. Store No. represents Store Name (or branch number) on
label/ticket printed.
1. Select “DEPARTMENT No.” and
“STORE ID”.
EX) DEPARTMENT No.= 2 (Grocery)
Store No.= 1 (Branch #1)
2.14.4 Date & Time (Menu code 1840)
( MENU → 8. Scale Config → 4. Date/Time )
This section is to set scale s DATE & TIME appropriately.
1. Set appropriate “DATE”, “TIME”,
and “MONTH FORMAT”.
EX) DATE= [07.02.04]
TIME= [10:30:00]
Month Format= [1]
2. Set “YEAR FORMAT”, TIME
FORMAT and separator for “DATE”.
EX) Year Format (0=2001, 1=01) = [1]
Time Format(0~3) = [1]
Date Separator = [-]
3. Set separators for “TIME”, using
ASCII code table on page
EX) Time Separator = [:]
▶ Please refer to “ASCII Code Table” (chapter 4.4) to input special characters in Date

CAS CL5200 Series Specifications

General

Brand	CAS
Model	CL5200 Series
Category	Scales
Language	English