6
• If you want to exit, press ESC key.
2.2.6.2 List Barcode (Menu code 1262)
( MENU → 2. PLU Data Table I → 6. Barcode → 1. List )
1. Set the list range
• Set the range of barcode that you wish to
Check
EX) Barcodes 1~10
• Press Print Key to List Barcodes on screen.
After Barcodes are listed on the screen,
pressing the TEST key will print the Barcodes.
2.2.6.3 Delete Barcode (Menu code 1263)
( MENU → 2. PLU Data Table I → 6. Barcode → 3. Delete )
1. Enter barcode number to delete
EX) Delete barcode 1.
Note: There is no confirmation request when
deleting a Barcode. Pressing the PRINT key
will cause the Barcode entered to be deleted.
2.2.7 Tare (Menu code 1270)
( MENU → 2. PLU Data Table I → 7. Tare )
The CL5000 series can be programmed to use a Tare No. instead of a numeric
value.(System Parameter 584) If you are using Tare Numbers they should be
programmed prior to programming any PLU's that use a Tare weight.
To Next Page
Loading...
Need help?
General
