99
Connecting to Devices
Connecting to a PC via USB
You can connect your phone to a PC with the USB Cable (included in
box), to transfer music, pictures, and other files between your phone’s
internal/external storages and the PC.
NOTES
• EUT (End User Upgrade Tool) is designed to upgrade the latest
software from a PC to a device using a USB connection.
• The first time you connect the phone to your PC using the
USB Cable, EUT will install USB driver, TL-PC(Tool Launcher),
UT(Upgrade Tool) and UTM(Upgrade Tool Monitor). Follow the
instructions displayed on the PC.
• You need to set the CD-ROM Autorun feature to be enabled.
Warning!
• When connecting your phone to a PC, you must follow your PC’s
instructions for connecting and disconnecting USB devices to avoid
damaging or corrupting the files.
• Failure to completely reseal the Charging/Data Port cover after use
may lead to water or other liquids entering the casing, which may
cause damage to the phone.
Connecting your phone to a PC via USB
1. Use the USB cable (included in box) to connect the phone to a USB
port on your PC.
The phone automatically connects in the EUT mode.
EUT mode automatically ends.
2. Drag the status bar down to open the Notification panel, then tap the
“USB Connected” notification.
3. Tap Charge Only, Media Device (MTP) or Camera (PTP) to
switch the connection method.
4. Tap OK.
To Next Page
Loading...
Need help?
General
