CESAB B 215 User Manual

0-10
SI UNITS
Meaning of SI
This manual uses SI units. SI represents the International System of Units, which was established to unify
the various systems of units used in the past for smoother international technical communication.
New Units Adopted in SI
<Reference>
(*): X represents the value in SI units as converted from 1 [in conventional units], which can be
used as the rate for conversion between conventional and SI units
(**): In the past, kilogram [kg] representing mass was often used in place of weight kilogram [kgf],
which should be used as the unit of force.
Conversion between Conventional and SI Units
Equation for conversion
When converting, change the unit of the value in conventional or SI units to the one in the
conversion rate column in the table above before calculation. For example, when converting 100 W
to the value in conventional unit PS, first change it to 0.1 kW and divide by the conversion rate
0.735499.
Item New unit
Conventional
unit
Conversion rate
(*)
)
(1 [conventional unit] = X [SI unit])
Force
(**)
N (newton) kgf 1 kgf = 9.80665 N
Torque
(**)
(Moment)
N·m kgf·cm 1 kgf·cm = 9.80665 N·m
Pressure
(**)
Bar kgf/cm
2
1 Bar = 1 kgf / cm
2
Pressure
(**)
Pa (pascal) kgf/cm
2
1 kgf/cm
2
= 98.0665 kPa = 0.0980665 MPa
↑↑mmHg 1 mmHg = 0.133322 kPa
Revolving speed rpm rpm 1 rpm = 1 r/min
Spring constant
(**)
N/mm kgf/mm 1 kgf/mm = 9.80665 N/mm
Volume l cc 1 cc = 1 ml
Power W PS system 1 PS = 0.735499 kW
Heat quantity W·h cal 1 kcal = 1.16279 W·h
Specific fuel consumption g/W·h g/PS·h 1 g/PS·h = 1.3596 g/kW·h
Value in SI unit = Conversion rate × Value in conventional unit Conversion rate: Figure corresponding
to X in the conversion rate column in
the table above
Value in conventional unit = Value in SI unit ÷ Conversion rate
https://www.forkliftpdfmanuals.com/

CESAB B 215 Specifications

General

Brand	CESAB
Model	B 215
Category	Forklifts
Language	English