Cisco 7940 Series User Manual

2-5
Cisco IP Phone 7960 and 7940 Series User Guide
78-10182-07
Chapter 2 How to Use the Handset, Speakerphone, and Headset
Adjusting the Handset, Speakerphone, and Headset Volume
Adjusting the Handset, Speakerphone, and Headset
Volume
Follow these steps to adjust the volume on the handset, speakerphone, or headset.
Procedure
Step 1 Press the up or down Volume button when the handset, speakerphone, or headset
is in use.
Note If you press the Volume button when none of these are in use, you are
adjusting the ringer volume. For details, see the “Adjusting the Ringer
Volume” section on page 3-12.
Step 2 To save this volume setting for future calls, press the Save soft key.
The volume for the handset, speakerphone, and headset will default to the
previously saved volume level with each new phone call. If you adjust the volume
during a call without pressing Save, you are changing the volume level only for
the duration of that particular call; on subsequent calls, the volume level will
revert to the previously saved setting.
Note You must adjust the volume for the handset, speakerphone, and headset
individually.

Cisco 7940 Series Specifications

General

Brand	Cisco
Model	7940 Series
Category	IP Phone
Language	English