Chapter 5 Customizing Your Phone or Device Profile from the User Web Pages
How to Change the Default Language
5-8
Cisco IP Phone 7960 and 7940 Series User Guide
78-10182-07
The language that you have selected now serves as the default language for each
of the User Options web pages in the current web session and in future sessions.
If you use Extension Mobility, the default language will display on the LCD
screen the next time you log on to a Cisco IP Phone.
Step 5 When you are finished, click Return to the Menu or Log Off at the bottom of the
page.
Tip • You can temporarily change the language for the User Options web pages
by clicking the “View page in” drop-down list located at the bottom of
each web page. However, doing so only changes the language displayed
for the current web session. The next time that you log on, the User
Options web pages will display in the default language.
• If you use Extension Mobility, and are logged in to a phone at the time that
you change the default language, you must log out and log in again to the
Extension Mobility service on your Cisco IP Phone in order to see the
language changes take effect on the phone’s LCD screen.
Changing the Language for the Phone LCD Screen
Use this procedure to change the default language in which information is
displayed on the Cisco IP Phone’s LCD screen.
Note If you use the Cisco CallManager Extension Mobility service, follow the
procedure described in the “Changing the Language for the User Options Web
Pages” section on page 5-7. This procedure allows you to change the default
language for your device profile.
To Next Page
Loading...
Need help?
General
