Cisco ASR 900 Series User Manual

interface loopback 0
ip address 9.9.9.9 255.255.255.255
!
mpls label range 1001 4000 static 16 1000
mpls t
router-id 9.9.9.9
!
mpls tp lsp source 10.10.10.10 tunnel-tp 1 lsp working destination 192.168.1.1 tunnel-tp 1
forward-lsp
in-label 100 out-label 300 out-link 1
reverse-lsp
in-label 400 out-label 200 out-link 2
!
out-link 1 connected to 192.168.1.1
out-link 2 connected to 10.10.10.10
Feature Information for VPLS Configuration over MPLS-TP
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 16: Feature Information for VPLS Configuration over MPLS-TP
Feature InformationReleaseFeature Name
This feature was introduced on the
Cisco RSP1 Module in this release.
IOS XE 3.5VPLS Configuration over
MPLS-TP
This feature was introduced on the
Cisco RSP2 Module in this release.
IOS XE 3.13VPLS Configuration over
MPLS-TP
This feature was introduced on the
Cisco RSP3 Module in this release.
IOS XE 3.16VPLS Configuration over
MPLS-TP
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
123
VPLS Configuration over MPLS-TP
Feature Information for VPLS Configuration over MPLS-TP

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English