Cisco ASR 900 Series User Manual

PurposeCommand or Action
Specifies the out-label number and out-link.
out-label num out-link num
Example:
Device(config-if-working)# out-label 20000 out-link
Step 11
Exits working LSP interface configuration mode and
returns to interface configuration mode.
exit
Example:
Device(config-if-working)# exit
Step 12
Specifies a backup for a working LSP.protect-lsp
Example:
Device(config-if)# protect-lsp
Step 13
Specifies the in label.
in-label num
Example:
Device(config-if-protect)# in-label 20000
Step 14
Specifies the out label and out link.
out-label num out-link num
Example:
Device(config-if-protect)# out-label 113 out-link
Step 15
Exits the interface configuration mode and returns
to privileged EXEC mode.
end
Example:
Device(config-if-protect)# end
Step 16
Configuring MPLS-TP LSPs at Midpoints
When configuring LSPs at midpoint devices, ensure that the configuration does not deflect traffic back
to the originating node.
Note
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
29
MPLS Transport Profile
Configuring MPLS-TP LSPs at Midpoints

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English