Cisco ASR 901 User Manual

1-160
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show ip vrf
Virtual-Access4 [D]
U 2:1 Virtual-Access3
Virtual-Access4
Table 1-6 describes the significant fields shown in the display.
The following example displays detailed information about all of the VRFs configured on the router,
including all of the VAIs associated with each VRF:
Router# show ip vrf detail
VRF D; default RD 2:0; default VPNID <not set>
Interfaces:
Loopback2 Virtual-Access3 [D] Virtual-Access4 [D]
Connected addresses are not in global routing table
Export VPN route-target communities
RT:2:0
Import VPN route-target communities
RT:2:1
No import route-map
No export route-map
VRF U; default RD 2:1; default VPNID <not set>
Interfaces:
Virtual-Access3 Virtual-Access4
Connected addresses are not in global routing table
No Export VPN route-target communities
Import VPN route-target communities
RT:2:1
No import route-map
No export route-map
Table 1-7 describes the significant fields shown in the display.
The following example shows the interfaces bound to a particular VRF:
Router# show ip vrf interfaces
InterfaceIP-AddressVRFProtocol
Table 1-6 show ip vrf Field Descriptions
Field Description
Name Specifies the VRF name.
Default RD Specifies the default route distinguisher.
Interface Specifies the network interface.
Table 1-7 show ip vrf detail Field Descriptions
Field Description
VPNID Specifies the VPN ID assigned to the VRF.
Interfaces Specifies the network interfaces.
Virtual-Accessn [D] Specifies the downstream VRF.
Export Specifies VPN route-target export communities.
Import Specifies VPN route-target import communities.

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English