1-161
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show ip vrf
Ethernet210.22.0.33vrf1up
Ethernet410.77.0.33hubup
Router#
Table 1-8 describes the significant fields shown in the display.
The following is sample output that shows all the VPN IDs that are configured in the router and their
associated VRF names and VRF route distinguishers (RDs):
Router# show ip vrf id
VPN Id Name RD
2:3 vpn2 <not set>
A1:3F6C vpn1 100:1
Table 1-9 describes the significant fields shown in the display.
Table 1-8 show ip vrf interfaces Field Descriptions
Field Description
Interface Specifies the network interfaces for a VRF.
IP-Address Specifies the IP address of a VRF interface.
VRF Specifies the VRF name.
Protocol Displays the state of the protocol (up or down) for each VRF
interface.
Table 1-9 show ip vrf id Field Descriptions
Field Description
VPN Id Specifies the VPN ID assigned to the VRF.
Name Specifies the VRF name.
RD Specifies the route distinguisher.