Cisco Nexus 1000V User Manual

24-7
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 24 Network Segmentation Manager
Network Segmentation Manager Troubleshooting Commands
Network Segmentation Manager Troubleshooting Commands
You can use the commands in this section to troubleshoot problems related to the NSM.
For detailed information about show command output, see the Cisco Nexus 1000V Command Reference.
Command Purpose
show network-segment manager switch Displays the Cisco Nexus 1000V configured with
NSM.
show running-config port-profile Displays the port profile configuration.
show running-config network-segment policy Displays the NSM policy configuration.
show network-segment policy usage Displays the network segmentation policy usage
by networks.
show network-segment network Displays the networks associated with a network
segmentation policy.
show network-segment network id id Displays the network IDs associated with a
network segmentation policy.
show network-segment network name name Displays the name of the networks associated
with a network segmentation policy.
show logging logfile | grep NSMGR Displays the system logs from the network
segmentation manager.

Cisco Nexus 1000V Specifications

General

Type	Virtual Switch
Manageable	Yes
NetFlow	Yes
SPAN	Yes
ERSPAN	Yes
Operating System	Cisco NX-OS
Form Factor	Virtual
Hypervisor Support	VMware ESXi
Features	VXLAN
Security Features	Port Security, Private VLANs, ACLs