25-20
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 25 VXLANs
VXLAN Data Path Debugging
Statistics
To display a summary of per-port statistics, use the following command:
vemcmd show vxlan-stats
To display detailed per-port statistics for VXLAN VTEP, use the following command:
vemcmd show vxlan-stats ltl vxlan_VTEP_ltl
To display detailed per-port statistics for the vEthernet interface in a VXLAN, use the following
command:
vemcmd show vxlan-stats ltl vxlan_veth_ltl
To display detailed per-port-per-bridge domain statistics for a VXLAN VTEP for all bridge domains, use
the following command:
vemcmd show vxlan-stats ltl vxlan_VTEP_ltl bd-all
To display detailed per-port-per-bridge domain statistics for a VXLAN VTEP for the specified bridge
domain, use the following command:
vemcmd show vxlan-stats ltl vxlan_VTEP_ltl bd-name bd-name
To display which VXLAN VTEP is used for encapsulation and subsequent pinning to the uplink port
channel for static MAC addresses learned on port, use the following command:
vemcmd show vxlan-encap ltl vxlan_veth_ltl
To display which VXLAN VTEP is used for encapsulation and subsequent pinning to the uplink port
channel, use the following command:
vemcmd show vxlan-encap mac vxlan_vm_mac
show Commands
Command Result
vemcmd show vxlan interfaces Displays the VXLAN encapsulated interfaces.
vemcmd show port vlans Checks the port programming and CBL state for
the bridge domain.
vemcmd show bd Displays the bridge domain segmentId/group/list
of ports.
vemcmd show bd bd-name bd-name-string Displays one segment bridge domain.
vemcmd show l2 all Displays the remote IP being learned.
vemcmd show l2 bd-name bd-name-string Displays the Layer 2 table for one segment bridge
domain.
vemcmd show arp all Displays the IP-MAC mapping for the outer
encapsulated header.
To Next Page
Loading...
Need help?
General
