Configuration | System | Servers | Authentication | Add or Modify
5-5
VPN 3000 Concentrator Series User Guide
Server Secret
Enter the RADIUS server secret (also called the shared secret); e.g., C8z077f. Maximum 64 characters.
The field shows only asterisks.
Verify
Re-enter the RADIUS server secret to verify it. The field shows only asterisks.
Add or Apply / Cancel
To add the new server to the list of configured user authentication servers, click Add. Or to apply your
changes to the configured server, click
Apply. Both actions include your entries in the active
configuration. The Manager returns to the
Configuration | System | Servers | Authentication screen. Any new
server appears at the bottom of the
Authentication Servers list.
Reminder: To save the active configuration and make it the boot configuration, click the
Save Needed icon at the
top of the Manager window.
To discard your entries, click
Cancel. The Manager returns to the Configuration | System | Servers |
Authentication
screen, and the Authentication Servers list is unchanged.
Server Type = NT Domain
Configure these parameters for a Windows NT Domain authentication server.
Figure 5-4: Configuration | System | Servers | Authentication | Add or Modify NT Domain screen
Authentication Server Address
Enter the IP address of the NT Domain authentication server; e.g., 192.168.12.34. Use dotted decimal
notation.
To Next Page
Loading...
Need help?
General