EasyManuals Logo
Home>Cisco>Switch>VPN 3000

Cisco VPN 3000 User Manual

Cisco VPN 3000
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add or Modify
7-15
VPN 3000 Concentrator Series User Guide
Note: An IP address is used with a wildcard mask to provide the desired granularity. A wildcard mask is the
reverse of a subnet mask; i.e., the wildcard mask has 1s in bit positions to ignore, 0s in bit positions to
match. For example:
0.0.0.0/255.255.255.255 = any address
10.10.1.35/0.0.0.0 = only 10.10.1.35
10.10.1.35/0.0.0.255
= all 10.10.1.nnn addresses
IP Address
Enter the IP address of the private local network on this VPN Concentrator. Use dotted decimal notation;
e.g.,
10.10.0.0.
Wildcard Mask
Enter the wildcard mask for the private local network. Use dotted decimal notation; e.g., 0.0.255.255.
The system supplies a default wildcard mask appropriate to the IP address class.
Remote Network
These entries identify the private networkon the remote peer VPN Concentratorwhose hosts can use
the LAN-to-LAN connection. These entries must match those in the
Local Network section on the peer
VPN Concentrator.
Network List
Click the drop-down menu button and select the configured network list that specifies the remote
network addresses. A network list is a list of network addresses that are treated as a single object. See
the
Configuration | Policy Management | Traffic Management | Network Lists screens. Otherwise, you can
select:
Use IP Address/Wildcard-mask below, which lets you enter a network address.
Create new Network List (on Add screen only), which lets you create a network list of remote network
addresses. The Manager automatically opens the
Configuration | System | Tunneling Protocols | IPSec
LAN-to-LAN | Add | Remote Network List
screen when you click Add; see description below.
If you select a configured network list, the Manager ignores entries in the
IP Address and Wildcard-mask
fields.
See the wildcard mask note above.
IP Address
Enter the IP address of the private network on the remote peer VPN Concentrator. Use dotted decimal
notation; e.g.
11.0.0.0.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco VPN 3000 and is the answer not in the manual?

Cisco VPN 3000 Specifications

General IconGeneral
BrandCisco
ModelVPN 3000
CategorySwitch
LanguageEnglish

Related product manuals