Cisco VPN 3000 User Manual

Configuration | System | Management Protocols | SNMP Communities
9-9
VPN 3000 Concentrator Series User Guide
Figure 9-7: Configuration | System | Management Protocols | SNMP Communities screen
Community Strings
The Community Strings list shows SNMP community strings that have been configured. If no strings have
been configured, the list shows
--Empty--.
Add / Modify / Delete
To configure and add a new community string, click Add. The Manager opens the Configuration | System |
Management Protocols | SNMP Communities | Add
screen.
To modify a configured community string, select the string from the list and click
Modify. The Manager
opens the
Configuration | System | Management Protocols | SNMP Communities | Modify screen.
To delete a configured community string, select the string from the list and click
Delete. There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the
Save Needed icon at the top of the Manager
window.

Cisco VPN 3000 Specifications

General

Brand	Cisco
Model	VPN 3000
Category	Switch
Language	English