Cisco VPN 3000 User Manual

8 IP Routing
8-2
VPN 3000 Concentrator Series User Guide
Configuration | System | IP Routing
This section of the Manager lets you configure system-wide IP routing parameters.
•
Static Routes: manually configured routing tables.
•
Default Gateways: routes for otherwise unrouted traffic.
• OSPF: Open Shortest Path First routing protocol.
• OSPF Areas: subnet areas within the OSPF domain.
• DHCP: Dynamic Host Configuration Protocol global parameters.
• Redundancy: Virtual Router Redundancy Protocol parameters.
You configure RIP and interface-specific OSPF parameters on the network interfaces; click the
highlighted link to go to the
Configuration | Interfaces screen.
Figure 8-1: Configuration | System | IP Routing screen
Configuration | System | IP Routing | Static Routes
This section of the Manager lets you configure static routes for IP routing. You usually configure static
routes for private networks that cannot be learned via RIP or OSPF.
Figure 8-2: Configuration | System | IP Routing | Static Routes screen

Cisco VPN 3000 Specifications

General

Brand	Cisco
Model	VPN 3000
Category	Switch
Language	English