EasyManuals Logo
Home>Cisco>Switch>VPN 3000

Cisco VPN 3000 User Manual

Cisco VPN 3000
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #474 background imageLoading...
Page #474 background image
A Errors and troubleshooting
A-8
VPN 3000 Concentrator Series User Guide
Command Line Interface errors
These errors may occur while using the menu-based Command Line Interface from a console or Telnet
session.
ERROR:-- Bad IP Address/Subnet Mask/Wildcard Mask/Area ID.
ERROR:-- Out of Range value entered. Try again.
ERROR:-- The Passwords do not match. Please try again.
Problem Possible cause Solution
The system expected a valid
4-byte dotted decimal entry,
and the entry wasnt in that
format.
You entered something other
than a 4-byte dotted decimal
number. You may have
omitted a byte position, or
entered a number greater
than 255 in a byte position.
You entered
0.0.0.0
instead of an appropriate
address.
At the prompt, re-enter a valid
4-byte dotted decimal number.
Problem Possible cause Solution
The system expected a number
within a certain range, and the
entry was outside that range.
You entered a letter instead
of a number.
You entered a number greater
than the possible menu
numbers.
At the prompt, re-enter a
number in the appropriate
range.
Problem Possible cause Solution
The entry for a password and
the entry to verify the password
do not match.
You mistyped an entry.
You entered either a
password or verify entry, but
not the other.
At the
Verify prompt,
re-enter the password. If the
original password is incorrect,
press
Enter and re-enter both
the password and the
verification at the prompts.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco VPN 3000 and is the answer not in the manual?

Cisco VPN 3000 Specifications

General IconGeneral
BrandCisco
ModelVPN 3000
CategorySwitch
LanguageEnglish

Related product manuals