EasyManuals Logo
Home>Cisco>Network Router>XR 12000 Series

Cisco XR 12000 Series User Manual

Cisco XR 12000 Series
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping: disabled, flooding: enabled
MLD snooping: disabled, flooding: disabled
MMRP Flood Optimization: disabled
Storm control: disabled
P2MP PW: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 1
Number of MAC addresses: 5
Multi-spanning tree instance: 0
PBB-EVPN: enabled
Statistics:
packets: received 0, sent 963770
bytes: received 0, sent 263433178
PBB Core, state: Up
Vlan-id: 1
XC ID: 0x80000010
Number of MAC: 0
Statistics:
packets: received 0 (unicast 0), sent 0
bytes: received 0 (unicast 0), sent 0
MAC move: 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
The following sample outputs shows the backup pseudowire information:
RP/0/0/CPU0:router#show l2vpn forwarding detail location 0/2/CPU0
Local interface: GigabitEthernet0/2/0/0.1, Xconnect id: 0x3000001, Status: up
Segment 1
AC, GigabitEthernet0/2/0/0.1, Ethernet VLAN mode, status: Bound
RG-ID 1, active
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
MPLS, Destination address: 101.101.101.101, pw-id: 1000, status: Bound
Pseudowire label: 16000
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Backup PW
MPLS, Destination address: 102.102.102.102, pw-id: 1000, status: Bound
Pseudowire label: 16001
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
RP/0/0/CPU0:router#show l2vpn forwarding bridge-domain detail location 0/2/CPU0
Bridge-domain name: bg1:bd1, id: 0, state: up
.
GigabitEthernet0/2/0/0.4, state: oper up
RG-ID 1, active
Number of MAC: 0
..
Nbor 101.101.101.101 pw-id 5000
Backup Nbor 101.101.101.101 pw-id 5000
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
108 OL-28460-01
Virtual Private Network Commands
show l2vpn forwarding

Table of Contents

Other manuals for Cisco XR 12000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco XR 12000 Series and is the answer not in the manual?

Cisco XR 12000 Series Specifications

General IconGeneral
BrandCisco
ModelXR 12000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals