Cisco XR 12000 Series User Manual

hidden (L2TP)
To enable hidden attribute-value pairs (AVPs), use the hidden command in L2TP class configuration mode.
To return to the default behavior, use the no form of this command.
hidden
no hidden
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
L2TP class configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to enable hidden AVPs:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class cisco
RP/0/0/CPU0:router(config-l2tp-class)# hidden
Related Commands
DescriptionCommand
Enables L2TP authentication for a specified L2TP class name.authentication (L2TP), on page 4
Configures the hello-interval value for L2TP (duration between
control channel hello packets).
hello-interval (L2TP), on page 29
Defines the name used in the L2TP hostname AVP.hostname (L2TP), on page 33
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 31
Virtual Private Network Commands
hidden (L2TP)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English