Cisco XR 12000 Series User Manual

show l2vpn pw-class
To display L2VPN pseudowire class information, use the show l2vpn pw-class command in EXEC mode.
show l2vpn pw-class [detail| location| name class name| standby]
Syntax Description
(Optional) Displays detailed information.detail
(Optional) Displays location specific information.location
(Optional) Displays information about a specific pseudowire class name.
name class-name
(Optional) Displays standby node specific information.standby
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.5.0
The keywords location and standby were introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Examples
The following example shows sample output for the show l2vpn pw-class command:
RP/0/0/CPU0:router# show l2vpn pw-class
Name Encapsulation Protocol
------------------------- ---------- ----------
mplsclass_75 MPLS LDP
l2tp-dynamic L2TPv3 L2TPv3
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
122 OL-28460-01
Virtual Private Network Commands
show l2vpn pw-class

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English