Cisco XR 12000 Series User Manual

l2tp-class configuration
To enter L2TP class configuration mode in which an L2TP signaling template is not defined, use the l2tp-class
configuation command in global configuration mode. To delete the L2TP class configuration, use the no
form of this command.
l2tp-class configuration
no l2tp-class configuration
Syntax Description
This command has no arguments or keywords.
Command Default
No L2TP classes are defined.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to enter L2TP configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class configuration
RP/0/0/CPU0:router(config-l2tp-class)#
Related Commands
DescriptionCommand
Enables L2TP authentication for a specified L2TP class name.authentication (L2TP), on page 4
Configures the hello-interval value for L2TP (duration between
control channel hello packets).
hello-interval (L2TP), on page 29
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 41
Virtual Private Network Commands
l2tp-class configuration

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English