Cisco XR 12000 Series User Manual

pw-class encapsulation l2tpv3
To configure L2TPv3 pseudowire encapsulation, use the pw-class encapsulation l2tpv3 command in L2VPN
pseudowire class configuration mode. To return to the default behavior, use the no form of this command.
pw-class class name encapsulation l2tpv3 [cookie size {0| 4| 8}| ipv4 source address| pmtu max 68-65535|
protocol l2tpv3 class name| tos {reflect value 0-255| value 0-255}| ttl value]
no pw-class class name encapsulation l2tpv3 [cookie size {0| 4| 8}| ipv4 source address| pmtu max
68-65535| protocol l2tpv3 class name| tos {reflect value 0-255| value 0-255}| ttl value]
Syntax Description
Configures an encapsulation class name.class name
(Optional) Configures the L2TPv3 cookie size setting:
• 0—Cookie size is 0 bytes.
• 4—Cookie size is 4 bytes.
• 8—Cookie size is 8 bytes.
cookie size {0 | 4 | 8}
(Optional) Configures the local source IPv4 address.
ipv4 source address
(Optional) Configures the value of the maximum allowable session
MTU.
pmtu max 68-65535
(Optional) Configures L2TPv3 as the signaling protocol for the
pseudowire class.
protocol l2tpv3 class name
(Optional) Configures TOS and the TOS value. Range is 0 to 255.
tos {reflect value 0-255 | value
0-255}
Configures the Time-to-live (TTL) value. Range is 1 to 255.
ttl value
Command Default
None
Command Modes
L2VPN pseudowire class configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 67
Virtual Private Network Commands
pw-class encapsulation l2tpv3

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English