Cisco XR 12000 Series User Manual

show l2vpn forwarding bridge-domain mac-address (VPLS)
To display the summary information for the MAC address, use the show l2vpn forwarding bridge-domain
mac-address command in EXEC mode.
show l2vpn forwarding bridge-domain [ bridge-domain-name ] mac-address {MAC-address| detail|
hardware {egress| ingress}| interface type interface-path-id| neighbor address pw-id pw-id} location
node-id
Syntax Description
(Optional) Name of a bridge domain.
bridge-domain-name
MAC address.
MAC-address
Displays detailed information for the MAC address.detail
Reads information from the hardware.hardware
Reads information from the egress PSE.egress
Reads information from the ingress PSE.ingress
Displays the match for the attachment circuit subinterface.interface
Interface type. For more information, use the question mark (?) online help
function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
interface-path-id
Displays the match for the neighbor IP address.
neighbor address
Displays the match for the pseudowire ID.
pw-id pw-id
Displays the bridge-domain information for the MAC address of the
specified location. The node-id argument is entered in the rack/slot/module
notation.
location node-id
Command Default
None
Command Modes
EXEC
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
206 OL-28460-01
Virtual Private LAN Services Commands
show l2vpn forwarding bridge-domain mac-address (VPLS)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English