Cisco XR 12000 Series User Manual

show generic-interface-list
To display information about interface-lists, use the show generic-interface-list in EXEC mode.
show generic-interface-list [ location | name | retry | standby ]
Syntax Description
(Optional) Displays information about interface-lists for the specified location.location
(Optional) Displays information about interface-lists for the specified interface
list name.
name
(Optional) Displays retry-list information.retry
(Optional) Displays Standby node specific information.standby
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
The following example displays output for the show generic-interface-list command:
RP/0/0/CPU0:router# show generic-interface-list
Thu Aug 2 13:48:57.462 CDT
generic-interface-list: nsrIL (ID: 1, interfaces: 2)
Bundle-Ether2 - items pending 0, downloaded to FIB
GigabitEthernet0/0/0/1 - items pending 0, downloaded to FIB
Number of items: 400
List is downloaded to FIB
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
84 OL-28460-01
Virtual Private Network Commands
show generic-interface-list

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English