Cisco XR 12000 Series User Manual

hello-interval (L2TP)
To configure the hello-interval value for L2TP (duration between control channel hello packets), use the hello
interval (L2TP) command in L2TP class configuration mode. To return to the default behavior, use the no
form of this command.
hello-interval interval
no hello-interval interval
Syntax Description
Interval (in seconds) between control channel hello packets. The range is from 0 to
1000. Default is 60 seconds.
interval
Command Default
interval: 60 seconds
Command Modes
L2TP class configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to configure the hello-interval value for L2TP to 22 seconds:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class cisco
RP/0/0/CPU0:router(config-l2tp-class)# hello-interval 22
Related Commands
DescriptionCommand
Enables L2TP authentication for a specified L2TP class name.authentication (L2TP), on page 4
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 29
Virtual Private Network Commands
hello-interval (L2TP)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English