Cisco XR 12000 Series User Manual

show l2tp class
To display information about an L2TP class, use the show l2tp class command in EXEC mode.
show l2tp class name name
Syntax Description
Configures an L2TP class name.
name name
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows sample output for the show l2vtp session class command:
RP/0/0/CPU0:router# show l2tp class name kanata_02
l2tp-class kanata_02
manually configured class
configuration parameters:
(not) hidden
(no) authentication
(no) digest
digest check enable
hello 60
(no) hostname
(no) password
(no) accounting
(no) security crypto-profile
(no) ip vrf
receive-window 888
retransmit retries 15
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
86 OL-28460-01
Virtual Private Network Commands
show l2tp class

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English