Cisco XR 12000 Series User Manual

shutdown (Bridge Domain)
To shut down a bridge domain to bring the bridge and all attachment circuits and pseudowires under it to
admin down state, use the shutdown command in L2VPN bridge group bridge domain configuration mode.
To re-enable the bridge domain, use the no form of this command.
shutdown
no shutdown
Syntax Description
This command has no keywords or arguments.
Command Default
By default, the bridge is not shutdown.
Command Modes
L2VPN bridge group bridge domain configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
When a bridge domain is disabled, all VFIs associated with the bridge domain are disabled. You can still
attach or detach members to or from the bridge domain as well as the VFIs associated with the bridge domain.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to disable the bridge domain named bar:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# bridge group 1
RP/0/0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/0/CPU0:router(config-l2vpn-bg-bd)# shutdown
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
210 OL-28460-01
Virtual Private LAN Services Commands
shutdown (Bridge Domain)

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English