Cisco XR 12000 Series User Manual

(Optional) Displays information about unresolved
cross-connects.
state unresolved
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.4.0
VCCV-related show command output was added.Release 3.4.1
Preferred-path-related show command output was added.Release 3.6.0
Sample output was updated to display the backup pseudowire information.Release 3.7.0
The following keywords were introduced:
•
brief
•
encapsulation
•
groups
•
location
•
mp2mp
•
mspw
•
pw-class
•
standby
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
If a specific cross-connect is specified in the command (for instance, AC_to_PW1) then only that cross-connect
will be displayed; otherwise, all cross-connects are displayed.
When configuring Ethernet Connectivity Fault Managment (CFM) over l2vpn cross-connect, the CFM
Continuity Check Messages (CCM) packets are not accounted for in the cross-connect pseudowire packet
counters displayed in this show command output.
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
130 OL-28460-01
Virtual Private Network Commands
show l2vpn xconnect

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English