Related Commands
DescriptionCommand
Specifies how long a backup pseudowire should wait before
resuming operation after the primary pseudowire goes down.
backup disable (L2VPN), on page 8
Enters L2VPN configuration mode.l2vpn, on page 49
Configures a pseudowire for a cross-connect.neighbor (L2VPN), on page 59
Enters p2p configuration submode to configure point-to-point
cross-connects.
p2p, on page 74
Configures cross-connect groups.xconnect group, on page 151
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
OL-28460-01 7
Virtual Private Network Commands
backup (L2VPN)