Related Commands
DescriptionCommand
Configures bridge behavior when the number of learned MAC
addresses reaches the MAC limit configured.
action (VPLS), on page 155
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 159
Creates a bridge group so that it can contain bridge domains and then
to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 161
Enters L2VPN configuration mode.l2vpn, on page 49
Enters L2VPN bridge group bridge domain MAC configuration mode.mac (VPLS), on page 175
Configures the specified action when the number of MAC addresses
learned on a bridge is reached.
maximum (VPLS), on page 177
Specifies the type of notification that is sent when the number of
learned MAC addresses exceeds the configured limit.
notification (VPLS), on page 185
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
188 OL-28460-01
Virtual Private LAN Services Commands
port-down flush disable (VPLS)