Daikin LXE10E-A User Manual

8-32
8.2.7 G-SET operation 1
(Applicable models:LXE10E-A11,A20,A26(AtoC),A18(A,B),A30 and A35(A,B))
Generator setting operation
Generator setting operation
①Press the G-SET key.
②Using and , select "11", "12", "13", "14", "15" (KVA) or "OFF", and determine it with key. The energy
consumption reducing operation will be applied under the selected value.
※
To reset Generator setting operation, set OFF in the above operation step ②.
※
When Generator setting operation is set, it will not be reset even if the power supply is turned off. (The setting is
held.)
▽△
wSelect "11", "12", "13", "14", "15" (kVA) or "OFF" indicated on the LED display using the key or
the key, and press the key to determine the setting, then the energy saving
operation starts so that the energy consumption is saved to be the selected value (kVA) or lower.
※If "OFF" is pressed in the procedure wabove, the energy saving operation will be cancelled.
※If the power supply is turned off when the setting mode is set to exception of 12(kVA), the setting is
returned to 12(kVA) automatically.
※Even though the value is expressed in kVA, this is actually a value in kW.
qPress the MODE key.
MODE
M
Setting item LED panel LCD panel Setting method
–– –– ––
Energy saving set point
OFF, 11, 12, 13, 14, 15
unit: kVA
Note) Even though the
value is
expressed in kVA,
this is actually a
value in kW.
G-SET Select the energy
saving set point by
using or key,
and press the key
to determine the
setting.
Current
indication mode
G-set operation
or non-key operation for 5 minutes
Automatic pump
down operation
G-SET
G-SETG-SET
ON, OFF P down Select "ON" by using
key and key,
and press the key
to determine the
setting.
8.2.8 G-SET operation 2 (Applicable models:LXE10E-A8,A9 and A19)
08LXE10E-A(32-39）07.2.232:15PMページ8-32
https://daikin-p.ru

Daikin LXE10E-A Specifications

General

Brand	Daikin
Model	LXE10E-A
Category	Air Conditioner
Language	English