3-32
To input the container I.D. (No.):
Press the key when the LCD displays "SET I.d", then display "i.d.-
C" (name of shipping company input with alphabetical character) or
"i.d.-n" (number input with numerical character) on the LED by using
or key.
To input the shipping company name (alphabet):
Press the key when the LED displays "i.d.-C" , then the leftmost
digit on LCD flashes. Select the alphabet to be input using the or
key, and press the key , then the flashing digit shifts to
the right.
Carry on the same procedure until the 4 letters are input , then press
the key to determine the input. Once determined, the input letters
will flash.
To input the numbers (numeral):
Press the key when the LED displays "i.d.-n" , then the leftmost
CONTAINER I.D.
(No.) INPUT
CONTROLLER TIME
INPUT
SS
<Key operation in this mode>
Whenever the key is pressed, the indication changes.
Turn OFF the power breaker to confirm the setting.
S
14. CONTROLLER SOFTWARE DOWNLOAD MODE
The data on personal computer and a controller are interchanged in this mode.
For details, see the Operation Manual For Personal computer software.
Downloading is possible even in "3. BATTTERY MODE". page 3-11.
digit on LCD flashes. Select the number to be input by using the or
key, and press the key , then the flashing digit shifts to
the right.
Carry on the same procedure until the 7 numbers are input , then
press the key to determine the input.
Once determined, the input numbers will flash.
To set the control time:
Press the key when the LCD displays "SET TIME", then the LCD
displays "YEAR" and the LED shows the year currently set in the
controller. Change the setting year by using the or key, then
press the key to determine the setting.
Then, the LCD displays "MONTH" and the LED displays the month
currently set in the controller. Change the setting month by using the
or key, then press the key to determine the setting.
Set day, time and minute by the same procedure.
Enter the day, hour or minute when "DAY", "HOUR" or "MINUTE" is
displayed on LCD respectively.
If the power circuit breaker (CB) is not turned off, the new setting will
not be recognized.
03LXE10E-A(15-32)07.2.1910:55AMページ3-32
To Next Page
Loading...
Need help?
General
