Daikin LXE10E-A User Manual

3-45
After replacing controller, the initial setting and software up-grade are required with following notes.
2. Initial setting to spare controller
Refer the initial setting work to attached [Initial setting procedure for spare controller DECOSⅢd, Ⅲc, Ⅲb].
※1 Set controller type DECOSⅢ "d" and other items by referring to attached [Initial Setting Table for
Spare Controller DECOSⅢd].
※2 Set controller type DECOSⅢ "c" and other items by referring to attached [Initial Setting Table for Spare
Controller DECOSⅢc].
※3 Set controller type DECOSⅢ "b" and other items by referring to attached [Initial Setting Table for
Spare Controller DECOSⅢb].
※4 Set controller type DECOSⅢ "c", FA SEN "OFF" and other items by referring to attached [Initial
Setting Table for Spare Controller DECOSⅢc].
※5 Set controller type DECOSⅢ "b", FA SEN "OFF", REHEAT "OFF" and other items by referring to
attached [Initial Setting Table for Spare Controller DECOSⅢb].
3. Up-grade to the latest software
After replacing controller with spare parts, install the latest software for up-grading.
Download the latest software from DAIKIN HOME PAGE as follows.
The unit can be operated with factory installed software loaded in the spare controller.
However Daikin requests to up-grade the software to the latest version for the best operation.
LXE10E-1,LXE10E-A & LXE10D
LXE10E-1
LXE10E-A
LXE10D
--- I.D. & PASSWORD are requested.
CONTAINER REFRIGERATION UNIT
DOWNLOAD
'http//www.daikin.com/service
※1, ※4, ※5
※2
※3
Up-grade procedure
for latest software version
※1,※2, -- ※5 show
numbers described
above.
DAIKIN
Download the
latest software
Install the latest software
03LXE10E-A(33-47)07.2.232:21PMページ3-45
https://daikin-p.ru

Daikin LXE10E-A Specifications

General

Brand	Daikin
Model	LXE10E-A
Category	Air Conditioner
Language	English