3-55
3.9.2.1 PTI selection mode
The test mode of FULL (F.PTI), SHORT PTI (S.PTI), and MANUAL CHECK (M.CHECK) can be
selected.
<Mode selection procedure>
<Operation procedure>
Whenever the or key is pressed, the indication changes.
To start FULL PTI, press the key while "F.PTI" is display on the
LCD.
To start SHORT PTI, press the key while "S.PTI" is display on the
LCD.
●When the key is pressed while "M-CHECK" is displayed on the
LCD, the manual check selection mode is set.
The detail of the manual check selection mode is described in
page 3-60.
I/O ON I/O OFF
Power OFF
Unit OFF
Circuit Breaker ON
for 3 sec.
F. PTI
S. PTI
M. CHECK
All indication
Lights on
(for 3 sec.)
Starting
Preparation
(for 18 sec.)
※ 1
Current
indication
(Operation state)
FULL PTI
SHORT PTI
MANUAL
CHECK
03LXE10E-A(48-60)07.2.232:28PMページ3-55