Danfoss iC7 Series Design Guide

4.9.2 Lifting the System Modules with Integration Unit 26
4.9.3 Lifting the Filters 27
5 Mechanical Installation Considerations
5.1 Storing the System Module 28
5.2 Requirements for the Cabinet 28
5.3 Mechanical Installation 28
5.3.1 Installation Requirements 28
5.3.2 Installation Directions 28
5.3.3 Installing System Modules 28
5.3.3.1 Installing System Modules into a Cabinet Vertically 28
5.3.3.2 Installing System Modules into a Cabinet Horizontally 30
5.3.3.3 Installing System Modules into a Cabinet on their Backsides 30
5.3.4 Installing System Modules with Integration Units 31
5.3.4.1 Installing System Modules with Integration Units into a Cabinet Vertically 31
5.3.4.2 Installing System Modules with Integration Units into a Cabinet Horizontally 33
5.3.4.3 Installing System Modules with Integration Units into a Cabinet on their Backsides 34
5.3.5 Installing Filters 35
5.3.5.1 Installing L Filter into a Cabinet, 400 A, 1000 A 35
5.3.5.2 Installing L Filter into a Cabinet, 1640 A 35
6 Cooling Requirements
6.1 Safety in Liquid-cooling 37
6.2 General Information on Cooling 37
6.3 Coolant 39
6.3.1 Quality Requirements for the Purified Water 39
6.3.2 Purified Water as Coolant 39
6.3.3 Antifreeze Mix as Coolant 39
6.3.4 Temperature of the Coolant 40
6.4 Cooling System 40
6.4.1 Materials 40
6.4.2 Heat Exchanger 41
6.4.3 Flow Rate of the Coolant 41
6.4.3.1 Flow Rates in Parallel Power Units 42
6.4.4 Volume of the Pipe 43
6.4.5 Pressure Drop 44
4 | Danfoss Drives Oy © 2024.03 AJ475942178716en-000101 / 172K2848A
Design Guide | iC7 Series Liquid-cooled System Modules

Danfoss iC7 Series Specifications

General

Brand	Danfoss
Model	iC7 Series
Category	Media Converter
Language	English