Design Guide | iC7 Series Liquid-cooled System Modules
8.9.6 Analog Reference Voltage Output 107
8.9.7 24 V DC Voltage Output 107
8.9.8 Thermistor Input 107
8.10 Assembling the Control Unit Mounting Plates 107
8.11 Attaching the Control Unit Mounting Plates 108
8.12 Installing the Control Unit 109
8.13 Installing Boards to the Modular Control Unit 109
8.14 Connecting the Fieldbus Cable and the Fiber Cables 110
8.15 Installing the Control Cables into the Control Terminals 111
8.16 Connecting the Control Panel 112
8.17 Fiber Cable Requirements 112
9 Maintenance
9.1 Preventive Maintenance Recommendations 113
9.2 Maintenance Log for Cooling System 116
9.3 Using the Product Modified Label 116
9.4 Replacing the RTC Battery 117
9.5 Removing the System Module from the Integration Unit 118
9.6 Installing the System Module in the Integration Unit 121
9.7 Draining the System Modules 123
9.7.1 Draining the System Modules, System Modules with Integration Units, and Filters 123
9.7.2 Draining the Power Units for xR10L and xR12L 124
10 Specifications
10.1 Tightening Torques 126
10.2 Dimensions 127
10.2.1 Dimensions of the Inverter Module, IM10L, AFE/GC Module, AM10L, and DC/DC Converter Module, DM10L 127
10.2.2 Dimensions of the Inverter Module, IR10L 128
10.2.3 Dimensions of the Active Front-end Module/Grid Converter, AR10L 129
10.2.4 Dimensions of the DC/DC Converter, DR10L 130
10.2.5 Dimensions of the Inverter Module, IM12L, AFE/GC Module, AM12L, and DC/DC Converter Module, DM12L 131
10.2.6 Dimensions of the Inverter Module, IR12L 132
10.2.7 Dimensions of Active Front-end Module/Grid Converter, AR12L 133
10.2.8 Dimensions of the DC/DC Converter, DR12L 134
10.2.9 Dimensions of the LC filter for AM10L 135
Danfoss Drives Oy © 2024.03 AJ475942178716en-000101 / 172K2848A | 7
To Next Page
Need help?
General
