Understanding the Tool Box Menus 179
Maintenance
CAUTION: Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Purpose:
To configure the paper density, the color registration adjustments, the initialization of the printer, and other
settings.
Va lu es :
Paper Density Plain Light Sets plain paper density.
Normal
Label Light Sets label paper density.
Normal
Color
Registration
Adjustments
Auto Correct Click Start to perform color registration
automatically.
Print Color Regi Chart Click Start to print a color registration chart.
Registration
Adjustments
LY(Left Yellow) Available Range:
-9 to +9
Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction) color
adjustment values that are found in the color
registration chart individually for Yellow, Magenta,
and Cyan.
LM(Left
Magenta)
Available Range:
-9 to +9
LC(Left Cyan) Available Range:
-9 to +9
RY(Right
Yellow)
Available Range:
-9 to +9
RM(Right
Magenta)
Available Range:
-9 to +9
RC(Right Cyan) Available Range:
-9 to +9
PY(Process
Yellow)
Available Range:
-9 to +9
PM(Process
Magenta)
Available Range:
-9 to +9
PC(Process
Cyan)
Available Range:
-9 to +9
Reset Defaults Initializes the system parameters.
Initialize Print Meter Click Initialize Print Meter to initialize the Print
Meter.
Non-Dell Toner Off Disables the use of another manufacturer's toner
cartridge.
On
Enables the use of another manufacturer's toner
cartridge.
A
d
just Altitude 0 meter Sets the altitude of the location where the printer
is installed.
1000 meters
2000 meters
3000 meters
Apply New Settings After you change the settings, click this button to
apply the changes.