Specifications 309
Cables
Your interconnection cable must meet the following requirements:
Optional Wireless Adapter
*1
: This item is available only when the optional hard disk is installed.
*2
: EAP method supports PEAPv0, EAP-TLS, EAP-TTLS PAP, and EAP-TTLS CHAP.
*3
: WPS 2.0 compliant.
Connection type Connection specifications and symbols
1 Ethernet 10Base-T/100Base-TX/
1000Base-T
2 Wireless adapter socket IEEE 802.11b/802.11g/802.11n
3 USB USB 2.0
Item Description
Connectivity technology Wireless
Compliant standards IEEE 802.11b, 802.11g, and 802.11n
Bandwidth 2.4 GHz
Data transfer rate IEEE 802.11n: 65 Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
Security 64 (40-bit key)/128 (104-bit key) WEP,
WPA- PSK (TKIP, AES), WPA2-PSK (AES), WPA-Enterprise (TKIP, AES)
*1*2
,
WPA2-Enterprise (AES)
*1*2
Wi-Fi Protected Setup
®
(WPS)
*3
Push-Button Configuration (PBC),
Personal Identification Number (PIN)
1
2
3
To Next Page
Loading...
Need help?
General