196 Understanding the Printer Menus
Default Color
Purpose:
To specify the output color.
Va lu e:
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer
language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error.
The change becomes effective after the printer is turned off and then on
again.
Va lu es :
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-out
Purpose:
To specify the execution time for one PostScript job. The change becomes effective after the printer is turned off
and then on again.
Va lu es :
Paper Select Mode
Purpose:
To specify the way to select the tray for PostScript mode. The change becomes effective after the printer is turned off
and then on again.
Va lu es :
Color (Auto)
*
Black
Off Discards the print job without printing an error message.
On
*
Prints an error message before it discards the job.
Off
*
Job time-out does not occur.
On 1 minute
*
A PostScript error occurs if processing is not completed after the specified time.
Available Range:
1-900 minutes.
Auto* The tray is selected as the same setting as in the PCL mode.
Select from Tray The tray is selected in a method compatible with regular Post Script printers.
To Next Page
Loading...
Need help?
General