Understanding the Printer Menus 215
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Panel Lock"
Panel Lock
Purpose:
To set a limited access to Admin Settings with a password, and to set or change the password.
Va lu es :
Function Enabled
NOTE: Function Enabled feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify whether to enable or disable each of the printer functions, or to require a password to use the functions.
Va lu es :
Data Encryption
NOTE: Data Encryption feature is available only when the optional hard disk is installed.
Purpose:
To disable or enable data encryption when using the printer.
Va lu es :
Panel Lock Control Disable
*
Disables password protection for Admin Settings.
Enable Enables password protection for
Admin Settings.
Change Password
*1
0000–9999 Sets or changes the password required to access Admin Settings.
*1
This item is available only when Panel Lock Control is set to Enable.
USB Direct Print On
*
Enables the USB Direct Print function.
On (Password) Enables the USB Direct Print function, but requires a password.
On (Color
Password)
Enables the USB Direct Print function with a color mode, but requires a
password.
Off Disables the USB Direct Print function.
Change Password
*1
Changes the password that is set under the Function Enabled menu.
*1
This item is available only when On (Password) or On (Color Password) is enabled.
Encryption Off
*
Disables encryption of the data.
On Enables encryption of the data.
Encryption Key Sets a key that is required for encryption.
To Next Page
Loading...
Need help?
General