Understanding the Printer Menus 227
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters are reset to their default values.
The following menu parameters are exceptions and are not reset.
• Network settings
• Panel Lock settings and password
• Function Enabled settings and passwords
• Login Error settings
• Set Available Time settings
• Secure Job Expiration settings
• USB Port settings
• Data Encryption settings
• Hard Disk Over write settings
• ColorTrack Mode settings
• ColorTrack Error Report settings
• Non Registered User settings
When Using the Operator Panel
1
Press the (
Menu)
button.
2
Press the button until
Admin Settings
is highlighted, and then press the
(Set)
button.
3
Press the button until
Maintenance
is highlighted, and then press the
(Set)
button.
4
Press the button until
Reset Defaults
is highlighted, and then press the
(Set)
button.
5
Press the button until
Yes
is highlighted, and then press the
(Set)
button.
The printer is restarted automatically.