Table 4. System Configuration (continued)
Option Description
Enable SMART Reporting If SMART Reporting is enabled, hard drive errors for integrated drives will be reported during
system startup.
Enable Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is
selected by default.
● Enable Microphone
● Enable Internal Speaker
Both the options are selected by default.
USB Configuration
When USB Boot Support is enabled, bootable USB mass storage devices can boot through
the boot sequence or boot menu. If disabled, the bootable USB mass storage devices are
prevented from booting through the boot sequence and boot menu, but USB ports are
functional in an OS environment:
● Enable USB Boot Support
● Enable External USB Ports
Miscellaneous Devices
Allows you to enable or disable the following devices:
● Enable Camera (enabled by default)
Keyboard illumination
Sets the keyboard illumination settings. To change these settings during normal use, press
<Fn>+<F5>. The brightness level can be set from 0% to 100%:
● Disabled
● Dim
● Bright
Keyboard Backlit Timeout on
AC
This feature defines the timeout value for the keyboard backlight when an AC adapter is
plugged into the system.
● 5 sec
● 10 sec-enabled by default
● 15 sec
● 30 sec
● 1 min
● 5 min
● 15 min
● Never
Keyboard Backlight Timeout on
Battery
This feature defines the timeout value for the keyboard backlight when the system is running
only on battery power.
● 5 sec
● 10 sec-enabled by default
● 15 sec
● 30 sec
● 1 min
● 5 min
● 15 min
● Never
Video
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD brightness is
independent for battery and AC adapter. It can be set using the slider.
68
System setup